Question: What Gear Ratio Is Better For Towing?

Does gear ratio affect horsepower?

Motor HP does not change when you change gear ratios.

The only thing that changes is torque.

A dynamometer measures torque and RPM, and from those two values calculates horsepower.

When you change gear ratios both RPM and torque will change but horsepower will not..

Are 3.73 or 4.10 gears better?

Well-Known Member. 4.10s are going to accelerate faster and decelerate faster on lift. However the trade off is greater fuel consumption per mile driven and higher engine speed per given road speed. In basic terms the 4.10s will feel quicker and 3.73 will feel faster.

Is it better to have a higher or lower gear ratio?

The higher the number the better the car will accelerate, but at the expense of high speed cruising. Now for the confusing part of the story. A high numerical gear ratio is called a low gear or low rear end, and vice versa. Low gears give fast acceleration, high gears give better cruising.

Are 3.73 gears good for towing?

The key to understanding gear ratios is to remember that, as the numerical ratio goes up, towing capacity increases but fuel economy goes down. … So, a truck with optional 3.73 gears will tow a heavier trailer than one with 3.55 or 3.21.

What gear ratio do I have by Vin?

Identify the VDS section, the fourth through eighth digits of the VIN. This section typically includes information such as the vehicle model, engine size and body type. While not every vehicle manufacturer includes gearbox ratio information in the VDS, this will be where the information is found if it was included.

Is 3.55 or 3.73 gears better?

3.55 will give you a little better gas mileage on the highway and slightly more highway oriented performance. 3.73 may be better for towing, lower end power (off the line acceleration), and may result in worse gas mileage on the highway.

Is a 4.10 gear ratio good?

FACT: A 4.10 axle ratio is ideal for towing heavy loads in a mix of city and highway driving and when towing on varied or steep grades. A 4.10 axle ratio will provide improved acceleration in stop and go city traffic.

Does higher gear ratio mean faster?

A lower (taller) gear ratio provides a higher top speed, and a higher (shorter) gear ratio provides faster acceleration. . Besides the gears in the transmission, there is also a gear in the rear differential.

What rear axle ratio is best for fuel economy?

3:55The most popular rear end ratio in trucks today is the 3:55, which sort of averages towing power and fuel economy. This is a good ratio for the occasional towing or hauling individual. For a person who tows more often, and heavier loads, the 3:73 or 4:10 may be more appropriate.

What gear ratio is best for towing?

3.73 ratioA 3.73 ratio is suitable for regular light towing. If you plan on towing a fifth-wheel trailer or anything heavier than 5,000 pounds, you should consider a 4.1 axle ratio. A 4.1 ratio allows a towing vehicle to start moving without as much throttle.

Is 3.08 a good gear ratio for towing?

Yes, you are exactly right, towing with a 6 speed with 3.08s is still better than towing with a 4 speed and 3.73s. If its a heavy trailer, you will probably never use 5th and 6th gears, but who cares? crank turns to rotate the rear wheels once that counts.

Are 4.10 gears good for highway?

Installing 4.10 gears improves the car’s performance on the track but with negligible effects to the highway driving. … Switching from a gear set of 3.55 or 3.73 to 4.10 gears will affect your gas mileage slightly as your engine will be turning more times to rotate the rear wheels once.

Can I tow with a 3.23 gear ratio?

The Chevy Silverado four-wheel drive crew-cab truck features a standard 3.23 axle gearing. A 9,600-pound tow rating results, which is impressive for the equipped standard axle ratio.

Is 3.42 or 3.73 better?

The 3.42 is fine for towing smaller boats, plus you will get better gas mileage for everyday driving. If I were towing frequently on hilly roads, I might would go for the 3.73 for better gas mileage while towing, but the 3.42 should be fine with a 205.

What’s the best gear ratio for 35 inch tires?

Depending on the axle, the next lowest ratio from a 4.10:1 is most likely the 4.56:1, which should be selected for towing and performance. Because of the extra weight associated with off-road tires, we usually recommend going with a performance-minded gear ratio for any tire size above 35 inches.